The Sewage Cleanup Process Explained
Stop the water that is causing the back up. Don’t flush the toilet or run water in the
sink. Stop the washing machine and anything else adding to the problem.
Keep people with
compromised immune systems or without proper protection from entering the
contaminated room. Never allow anyone with open skin injuries near sewage.
Take as many pictures of the backup and damage as you can. Document
the extent and depth of the sewage. Also photo all contents. Photos can help identify the contents which
are lost if you are covered by insurance. If the problem was created by a
utility, they may require proof of the extent of your loss. Pictures are never a mistake.
Call your insurance agent. You have a duty as an insured to
minimize the damage from any covered loss and any help or advice from them to minimize
the damage can help you.
If you know professionals that you trust and know that they will
do a good job, have that company respond to the problem. Unfortunately, the
“preferred remediation vendor” suggested by an adjuster may not be the best
choice for you or your home. Homeowners can select a company they trust. Claims
are paid using standardized software that accounts for the actual work required
“item by item”. This program is like the one used for repairs to cars after an
Do not touch contaminated
materials without personal protection such as gloves, protective clothing,
glasses and masks.
Have the standing sewage water pumped or removed from the area.
Sump pumps that can pump down to 1/8 inch of standing water can be used to
accomplish this. The sooner the water is gone the less water is absorbed by the
building and contents.
Turn off any electrical system or appliance. Any time water and
electricity mix can be a disaster.
Make sure that any ductwork or other pathway that could spread the
odor and contamination are closed off. Open any windows and vent the area.
Seal the contaminated areas of a building from the areas that are
not contaminated. Close doors and hang plastic sheets in openings.
Install professional grade
exhaust fans (negative air equipment) to drive the odor and any airborne
particles out of the building.
Do not place fans to dry the contaminated area prior to cleaning
the surfaces. Never sweep or disturb dried sewage. That puts it into the air
where it can both spread and be inhaled.
Remove items that can’t be salvaged from the building. That would
include wet drywall, paneling, most carpeting and pad, upholstered furniture,
curtains, wet books and similar items. Bag the items before carrying them to
reduce additional area or personal contamination.
Remove and dispose of items that cost more to clean than to
Stage the items that can be cleaned and salvaged in a place where
they can be cleaned. It is best to not move those items to uncontaminated
building areas because that creates more areas that will need
decontaminated. The best place would be the outdoors if the
weather allows or a separate block garage or other facility. In the case where
I was with Un-Flood-It, those options were not practical because it was a rainy
day. Their innovative solution was a large box truck in the driveway to stage
the items that could be safely cleaned.
Physical removal of the
waste sewage on contents is an essential part of the cleaning process before
disinfection. After wiping, Un-Flood-It used a plant based disinfectant and
anti-mold product to disinfect contents. My testing surfaces with ATP methods
proved that the product is effective.
Open any wall cavities that have gotten wet. Remove the distance
up from the floor that the materials have gotten wet including baseboard, wall
materials and insulation.
Once windows and doors can be closed, dry the area using
dehumidifiers. This is not effective while the area is being vented with open
windows and doors and may need to wait until the initial removal and waste
removal is complete.
The best cleanup procedure is low pressure steaming of floors,
walls and other contaminated surfaces followed by a disinfectant spray. It
cleans the surfaces of the waste in addition to disinfection. This should be a
slow and methodical process. Clean inch by inch, square foot by square foot for
the best results.
The bottom line is your health and the value of your home is
dependent upon proper cleanup after a sewage backup of any type. As an
environmental inspector, I have found that a “do it yourself” cleanup can be
the source of mold, odor and health problems years after the backup occurred. An
improper cleanup can also make resale of a home more difficult. A professional
cleanup is the best solution to sewage backup.
Go to www.Envirospect.com/sewagecleanup for more information about Healthy Infusion