Depending upon the level, location, use and extent of remediation required, the remediation needs to be done with appropriate levels of protection. Persons handling materials, contents and debris from a mold remediation are exposed to elevated mold levels. Mold can spread just as when you blew on the dandelion that turned white and saw the tiny seeds go everywhere. PPE or “Personal Protective Equipment” needs worn by those exposed to airborne mold during work.
At a minimum, workers need protected with masks. In higher mold conditions or closed areas, gloves and suits may also be crucial and necessary protective equipment.
If an area of remediation has disturbed materials, the area being cleaned needs contained from spreading disturbed mold through other areas of the building envelope. Contaminated materials need to be wrapped and carried out of the building while enclosed or wrapped to prevent mold contaminated materials from harming others.
In areas of significant disturbed mold contaminated materials, the area of work may need protected with an airlock. This is usually simple, overlapping plastic doors that appear like the scene you may remember from the movie "ET the Extraterrestrial. This is called containment.
In situations where there is concern and risk that disturbed mold may be drawn from the disturbed area into the other areas of the building, the work area needs placed under negative air pressure. That means the air is drawn from that area and sent to the exterior.
Forced air heating systems are another place that needs professionally considered to avoid moving mold through the rest of the building. Ductwork may need sealed within work areas to avoid the furnace or AC blower pushing mold through the building while the unit is operating.
Another aspect of the professional mold remediation job is air scrubbing. Mold spores go into the air. That process is accelerated when mold is disturbed during work. As that mold is floating in the work area can be collected onto a filter in the piece of equipment called an air scrubber. This is a highly efficient air filter designed to capture the small particles such as mold.
Post Remediation Verification Testing at the End of Remediation At the end of the work, you should have proof that the work was effective in removing the mold. This is done by conducting a "clearance test" also known as a PRV, short for "Post-Remediation Verification" Accepted procedure is that clearance testing should not be conducted by the remediator.to avoid the “fox counting the chickens in the chicken coup.”
Selecting the right professional for your project can be a scary challenge. It is a very important task with the health of occupants of the mold contaminated building depending upon the work of possibly unknown strangers.
For links and additional information about finding help for mold remediation, go to: www.Envirospect.com/FailedRemmediation
The sad truth is that many mold remediation jobs fail and leave the customer with an empty wallet and a home that is still unhealthy. Mold has often grown back within weeks or months of a treatment. The mold remediators that do not do a good job count on several factors.
It is shocking to find that after thousands of dollars of treatment many homes still have mold visible in areas such as behind baseboards, behind walls, in ductwork and on contents that were not treated. Those remediators are counting on the customer not recognizing the remaining mold.
What the Bad Mold Remediators Want you to Believe
We all pretty much trust the claims on the label of Lysol Disinfectant Spray. In bold letters is says that it has a 99.9% kill rate for germs, bacteria and mold. Heck, they wouldn’t make a false claim, would they?
Picture that we go into a dirty, dusty room and spray everything with a mist of Lysol. Fast forward two weeks. The dust, dirt and other debris is still there. Maybe we even add a little food debris on the kitchen counter and table.
Do you for one minute believe that any home will be germ free three weeks after being sprayed? Simply spraying or fogging with a mold product is not enough to make a home or any other building an acceptable level of mold for more than a few days or weeks.
It’s the Preparation That Makes the Difference
The most economical and healthy approach to mold remediation in a building is to complete remediation of all mold contaminated areas and sources of contamination in the initial project. An independent expert in the building science of mold should do an assessment for two reasons. One reason is the added expertise in finding mold and creating the plan to keep it from coming back. The other is that it will provide a customer the information to know which mold remediators proposal is right for the property. You want enough work done to make sure the property stays mold free and mot more work or expense than is necessary.
Selecting a Remediator and Treatment System
Identifying and removing materials and contents that can’t be cleaned is the first step. Deep cleaning of organic debris and dust is critical to success. HEPA cleaning, wiping and disinfection of surfaces is required for most remediations to be successful and lasting. Do not settle for spraying or fogging without preparation.
There are numerous mold treatment systems available that encompass a wide range of chemicals of varying toxicity. Some chemicals that have superb effectiveness are very dangerous to health and safety. The goal is selecting a treatment system that can fully kill mold and yet be safe for residents and mold technicians. The additional important criteria are that the residual chemical should have a degree of continued effectiveness and yet be safe for occupant and pet exposure.
Make sure that product label instructions are followed. The use of an enzyme-based treatment system is often a great choice. In any instance, the chosen treatment system should be applied according to directions by technicians utilizing proper procedures and personal protective equipment. All systems of mold treatment include application of chemical products that should be done by trained professionals to assure both safety and effectiveness.
Indoor air humidity and to be less than 40% to 50 %, and all cavities and surfaces free of wetness. All water leaks and events need corrected. The conditions that allow mold growth must be avoided.
Imagine struggling with an unexplained illness that robs you of normal life. You go from traditional doctor to traditional doctor and still no answers other than it must be your imagination. This isn’t science fiction. It is real people, real life and may even be you or your loved one.
For too long, people have unknowingly eaten, inhaled, drank and absorbed toxins that are often hidden in everyday products and the vary air and water we need to live.
Big business and government have told us not to worry, they will keep us safe. We are told that we can trust the food, water and air. They tell us the multitude of energy waves they beam through our bodies won’t hurt us. They did the same with asbestos, lead paint, radon and the drinking water in Flint Michigan.
There is new hope and healing for the millions of people affected with environmentally created health problems. CIRS, MCS, chemical toxicity, autoimmune disease and sensitivity to electro-magnetic forces are some of the illnesses. For many individuals, the health problems are the result of compromised health due to chemotherapy, organ transplants, and other illnesses that attack the bodies’ ability to heal.
Modern chemistry has brought us tens of thousands of untested new chemicals mixed in combinations to create hundreds of thousands of new exposures. If the product doesn’t have a toxin as a key ingredient, manufacturers often add toxic chemicals to create a pleasant odor.
What we have been doing is not enough to protect our health and the health of our children It is not OK to keep dosing environmentally ill individuals and ignore the source and causes. It is unacceptable to dismiss environmental illness as imagined or unimportant.
People are the sum of their genetics, health history and exposures. We accept that some children can find a peanut deadly, but have a difficult time understanding that other exposures can be deadly.
It is time for qualified Functional Professionals to work together to identify the causes of environmental health, find ways to avoid the toxins and help the people affected by environmental hazards to heal.
Functional Health Professionals
It is not enough to give people pills to treat the symptoms of environmental illness instead of the illness itself. Functional Health Professionals identify the cause and source of illness. They prescribe testing that can confirm what is the cause of illness. The source of illness can range from the food we eat to the air we breathe.
When food is the source of illness, they prescribe diets to improve health. When environmental factors are the issue, they refer patients to Functional Environmental Professionals to test and evaluate the source of toxins. Mold is the most common source of environmental illness.
The Functional Health Professional’s next steps are to provide advice to avoid the risk and medical care detoxifying and healing patients.
Functional Environmental Professionals
Functional Environmental Professionals (FEPs) explore the wide range of sources of environmental health risks. Mold is the most common problem. Toxic exposures can be found in drinking water, building materials, construction defects, HVAC systems, or from the activities of every-day living. Health risks can be from daily or occupational activities, frequented buildings or even outdoor sources. Testing is done to confirm the source of an exposure and then it is important for the FEP to identify and report on the changes needed to remediate the risk and avoid its return. Educating the client in avoiding future exposures is important to recovery. All buildings and their exposures are a science experiment. We all know that if we do not change the conditions of the experiment, the results will be the same. Identifying the changes that are required to keep a building healthy is a critical part of the assessment that requires a qualified Functional Environmental Professional.
It is not enough to spray a chemical in a building and declare that everything is better. Functional Remediation Professionals (FRPs) understand that there is not a single magic spray or pixie dust that remediates every building. When you clean your kitchen counter, you wipe the food and debris that is the food of bacterial and viruses off the counter. Just picture if you sprayed Lysol on the kitchen counter without cleaning up the food debris for the next couple of weeks. Yep, Lysol has a 99.8% kill germ claim, but that is not enough to spray a house without cleaning up the bad stuff where the contaminants are living. It is critical to test a patient’s reaction to treatment products before they are applied. This is especially true in one that is occupied by chemically sensitive or environmentally ill individuals. Functional Remediators follow the protocols of Functional Environmental Professionals that include containment, negative air and air scrubbing. Just as the dandelion will spread its white seeds when blown on, contaminants can be spread through a building during remediation. Improper remediation can make an unhealthy building even more toxic.
The Healthy Infusion Program Brings Functional Professionals Together
It is not enough to treat symptoms of illness. We should have healing.
It is not enough to test for an environmental risk. We should strive to correct the cause or reduce the exposure and its return.
It is not enough to spray a “one size fits all” chemical and declare a building free of toxins. We must treat with sensitivity to the occupants and using methods to contain exposures during treatment. We must change the conditions that cause a toxic environment.
Functional Professionals are a team that is focused on identifying the underlying conditions and improving the causes and conditions that can be improved.
Simply put, the Healthy Infusion Program is designed to bring the functional professionals together to address the source of environmental hazards and the path toward good health.
Where do we go From Here?
We know that our modern world has created many environmental risks that can affect each person differently. We need to understand the complexities of the life today and not dismiss the concerns of those that are affected by elements of our changing, complex and often toxic environment. We need to work together to provide the best outcomes for environmentally ill individuals.
In thousands of homes and on social media posts across the land, you saw the annual notice heralding the end of summer vacation: “Summer is over and the kids are back in school”. Some will cry, some will cheer, some will only shrug their shoulders. No matter what we do or say, every school year, the emotion, and the back to school sales come to an end and attention shifts to the students actually being in school.
That is “all as it should be” with each new school year. The sad news is that the “welcome back student” message has been accompanied with too many news stories about mold being found in our nation’s schools. It is not an accident that “National Mold Awareness Month” is September.
The bottom line on this is that parents DO NOT want their child sick because they go to school. Our schools that have mold are like the “Jaws” movies. Just when you think it is safe to return, we find out that it is “not so safe.”
When we experience any school environmental issue such as mold, it can be front page headlines, TV, talk show fodder and Facebook news feed material.
Environmental issues in schools are not “just another student health issue”. These problems are a public relations nightmare, a staff human relations mine field, a facility management challenge, a budget buster, a political fiasco and a liability time bomb.
Signs of Mold in School
If a school is flooded or has leaks that are not quickly cleaned up, there will be mold. Whether it is a roof leak, plumbing leak or any other area of wet surfaces, you can count on mold growing.
Parents should take a look around their child’s school. Water stains are the target to look for. Fuzzy or splotchy areas are the bullseye in the search for suspected mold. These can be in almost any area of a building anywhere from the highest ceiling to the lowest floor.
In addition to the visual indicators of mold presence, odor can be indicator. When the odor of mold is in the school or on a child’s clothes, books, papers or possessions, mold should be investigated as a source of the offensive smell.
Sewage backups, leaks and all floods also have a host of water borne diseases and contaminants. When these occur, a professionally conducted disinfection must be conducted even when mold is not visible. Even a little dust left in an obscure corner after the flood is gone can enter through a cut in a student’s hand or their lungs long after the water is gone if the areas has not been disinfected.
Imagine you are a professional mold remediator. You know that the goal you are pursuing is to correct the nasty mold levels. You should also make corrections so that the mold doesn’t return. The customer is paying you thousands of dollars to achieve those goals. Hanging in the balance is the health of the family living in the home.
Now that you have a vivid picture of the importance of a proper mold remediation in your mind, let me tell you about my experience as an environmental consultant earlier today. Today is the fourth time this professionally remediated home has failed clearance. Each previous time it failed, I have spoken with the remediator about ways that his company can properly remediate the home. Each time, he has ignored the advice. I truly want this job done correctly and the family living in the home o enjoy a healthy home forever more.
Mold Remediation 101
Choosing Remediation Systems and Reliable Professionals: There are many mold treatment systems available that encompass a wide range of chemicals of varying toxicity. Some of the chemicals that have superb effectiveness are very dangerous to health and safety. Others require precise attention to detail. The goal is to select best treatment system for a project that will fully remove or kill mold in a safe environment for workers and occupants of a building.
Treatment Systems for Chemically Sensitive Individuals: In the case of mold or chemically sensitive individuals, we highly recommend exposure to a sample of treatment products before a system or chemicals are used in their property. This can easily be accomplished by provision of a sample cloth treated with a product and given to the sensitive occupant prior to remediation treatment. They should also have “test” exposure to any building material or product brought into a building. Even reaction to a common product such as caulking can create problems for chemically sensitive individuals.
Preparation for Remediation: Remediation systems require proper preparation and conditions for the treatment system to be effective. One example is that the building should be less than 40% to 50 % relative humidity. Another example is that mold and biological debris should be removed before treatment. Moldy contents need addressed with treatment or removal from the site. All water leaks and events need corrected and promptly addressed and resolved. We need to avoid the types of surfaces and materials that may be a substrate for mold growth.
Protecting the Occupants and Workers: Depending upon the level, location, use and extent of remediation required, the remediation needs to be done with appropriate levels of protection for the premises, occupants and workers. Persons handling building materials, contents and debris contaminated by mold are exposed to elevated mold levels. This is because the disturbed mold spreads in the same way as when you blew on the dandelion that turned white. As kids, we were amazed as the tiny seeds went everywhere. If you are like me, you never gave a thought to the fact we were spreading dandelion seeds. We know better now. PPE or “Personal Protective Equipment” needs to be worn by those exposed to airborne mold during work.
At a minimum, workers need protected with masks. In higher mold conditions or closed areas, gloves and suits may also be crucial and necessary protective equipment.
Stopping the Spread of Mold During Remediation: If an area of remediation has disturbed materials, the area being cleaned needs first contained from spreading disturbed mold through other areas of the building envelope. Contaminated materials need to be wrapped and carried out of the building while enclosed or wrapped so as not to allow the mold contaminated materials to harm others.
In areas of significant disturbed mold contaminated materials, the area of work may need protected with an airlock, usually simple, overlapping plastic doors that appear like the scene you may remember from the movie "ET the Extraterrestrial. This is called containment.
Exhausting Mold Spores Outdoors: In situations where there is concern and risk that disturbed mold may be drawn from the disturbed area into the other areas of the building, the work area needs placed under a negative pressure. That means the air is drawn from that area and sent to the exterior. Furnace ductwork may need sealed within work areas to avoid the furnace or AC blower pushing mold through the building while the unit is operating. The process of establishment of a negative air flow away from the non-contaminated areas is called negative air.
Filtering the Mold Floating in the Air: Another aspect of the professional mold remediation job is air scrubbing. Disturbed mold spores go into the air. The mold floating in the work area can be collected onto a filter in the piece of equipment called and air scrubber. This is a highly efficient air filter designed to capture the small particles such as mold.
Drying out the Building: Dehumidification to a low moisture level is required for effective mold remediation. Portable commercial dehumidifiers are often used for that purpose.
There is no doubt that until now, the very real need of getting past the mold fears of the parties to a real estate transaction has not been met in a comprehensive program. Creating that system addressing the fears is not only a business need, it is an act of kindness. There is no part of the Real Estate process that could be considered pleasant or entertainment. The fears are truly disruptive, stressful and painful for all parties.
The Critical Steps of a Program to Get Past the Mold Fears